HY Twin Pull Cord Wireless SOS Alarm Kit

HY Twin Pull Cord Wireless SOS Alarm Kits:

• Ideal for Wash Rooms & Bathrooms.
• 2 x Wireless Operated Pull Cords: 100 metre (line of sight operation).
• Signal Repeaters Available.
• Built in Buzzer on the Pull Cords (customer knows it has worked).
• Battery Powered Pull Cords (2 x AAA batteries).
• 2 x Simple Plug in Siren Receivers (volume 95 Decibel).
• Quick & Easy to Install (designed for DIY).
• LED Indication:
  • During Alarm Activation.
  • In Standby (optional). 
• Receivers Plugs Directly into a Wall Socket (UK 3-pin & EU 2-pin).
• Fully Expandable.

How it Works:

This simple Alarm comprises of two Battery Powered Pull Cords & 2 x Plug in Siren Receivers which are all paired together within a unique and secure wireless network.

If a Customer requires Help, they can Pull either of the Pull Cords (they will hear a buzzer from the pull cord), which will in turn trigger both Sirens on the Wireless Receivers.

Siren Receivers:

The Siren Receivers Plugs directly into a UK (3-pin) or EU (2-pin) Wall socket making them very easy and quick to Install.

They have a built in 95 Decibel Siren which can be programmed to operate for 3 minutes or 30 seconds each time they are Triggered.

Up to 32 Pull Cords (or other HY Sensors) can be used at the same time.

Additional Siren Receivers (005-6400) can be added should you want them in different Rooms.

Pull Cords:

The two Wireless Pull Cords:

• 2 x Pull Cords & Transmitters (typically used within Bathrooms).
• Wireless Transmission to all HY Receivers.
• Built in 80 Decibel Buzzer (user knows they have activated the Transmitter).
• Buzzer Duration: 30 seconds (or can be immediately turned off). 
• Battery Powered: 2 x AA Batteries (easy & quick to install).
• For use in Emergencies.

Wireless Operation:

The Wireless operational range between the Pull Cords & Siren Receivers is 100 metre (line of sight) which equates to around 50 - 75 metres in most applications, however one or more signal Repeaters can be added which can massively extend this range, these include:

• Indoor Plug in Signal Repeater (005-0760).
• Outdoor Solar Siren & Repeater (005-6000) which can be used with or without the loud Siren.

Expandable:

This Pull Cord Alarm can be expanded to cover many different applications, these include:

• Additional Pull Cords (005-6470).
• Additional Indoor Siren Receivers (005-6400).
• Outdoor Solar Sirens (005-6000).
• Smoke & Heat Detectors (005-6050).
• Water Sensors (005-6440).
• Alarm Sensors (Door/Window Contacts & PIR's).

Please Contact Us if you have any Questions !!

• 2 x Pull Cords Kit (005-6470).
• 2 x Wireless Siren Receivers (005-6400).

Siren Receivers:

• Power Supply: Plugs directly into a 3-pin or 2-pin EU Wall Socket (100 - 240v AC)..
• Zones: 32 (with all HY Sensors).
• 24 Hour Mode: Yes.
• Remote Control Operation: max of 8.
• Volume: 95 Decibel.
• Wireless Range: 100 metre (line of sight).
• LED Indicator: Yes:
• When Arming & Disarming.
• When Alarm Triggering.
• In Standby (optional).
• Operation: All HY Detectors & Sensors.
• Tones: 1 (Siren).
• IP Rating: No.
• Standby current: <50 mA.
• Trigger current: < 150 mA.
• Dimensions: 69 × 69 mm (L × W).
• Operating temperature: -20°C to 55°C.
• Relative humidity: 40 to 80%.
• Wireless frequency: 433.92 MHz.

Pull Cords:

• Built in Sound: Yes (80 dB).
• Sound Duration: Approximately 30 seconds (can be turned off before).
• Operating voltage: DC 3V (2 AA 1.5V batteries).
• Standby current: ≤5 µA.
• Alarm current: ≤50mA.
• Wireless frequency: 433.92 MHz.
• Wireless range: 100 meters (line of sight) which can be more than doubled using a signal repeater.
• Operating temperature: -10°C to 50°C.
• Operating humidity: ≤80%.
• SOS button dimensions: 86 × 86 mm (L × W).
• Length of trigger cord: 495 mm.