600 metre DA600 Wireless Doorbell System

Medium Range (600 metre) DA600 Wireless Doorbell System, supplied with a simple Plug in Wireless Receiver (with built in Chimes & adjustable volume), Heavy Duty Push Button (with please ring etched onto it) & Battery Transmitter.

Popular in the smaller commercial applications including:

• Offices.
• Warehouses.
• Factories.
• Large Homes.
• External Home Offices.
• Workshops.

The transmission range between the Battery powered Wireless Transmitter and plug in Receiver is 600 metres (line of sight), which equates to around 200 - 400 metre in most applications, this can be at least doubled by adding the Signal Repeaters (004-2910).

How it Works:

The Heavy Duty Push Button (with 'Please Ring' etched onto it) is connected to a Long Range Battery Transmitter (fitted inside a easy to mount weatherproof box) by 3 metres of bell cable (which can be shortened or lengthen upon request).

The Push Button would be mounted onto the most appropriate location and the transmitter box would be located into the lost suitable location for wireless transmission (this could be simply on the back of a post or just inside a factory wall).

The Wireless Receiver simply plugs into a 3-pin wall socket and has 35 different chimes to choose from together with 4 levels of volume control, suitable for many office & work applications but not recommended in loud warehouses & workshops. Multiple Receivers can be added.

The Receiver can also be used with additional transmitters (maximum of 32) including:

• Push Buttons.
• Door Contacts.
• PIR's. 

When the system is not required, you simple turn the Internal Receiver OFF.

Installation Guide:

These Bell Systems are very Easy to Install, the basic process would be:

1. Mount the H/D Push Button.
2. Mount the Battery Transmitter & Box (4 x Screws).
3. You may need to Remove the Cable between the Push Button & Transmitter Box to guide it through a hole in a Wall or Post (the cable can be lengthened or shortened to suit the application).
4. Plug in the Receiver into a standard 3-pin Wall Socket.

Please Contact Us for Friendly, No Obligation Advice !!

Very Easy & Quick to Install !!

• 1 x H/D Push Button.
• 1 x S Transmitter & Mounting Box.
• 1 x 3 metre Bell Cable. 
• 1 x Plug in Wireless DA600 Receiver.

Receiver:

• Power Supply: 3-pin Socket.
• Volume Control: Yes (4 levels).
• Chimes: 35.
• Wireless Range: 600 metres (line of sight).
• Can work with additional PIR's: Yes (maximum 32).
• Colour: White.
• Size: 85 (H) x 80 (W) x 33 (D) mm.

Wireless Transmitter:

• Wireless Range: 600 metres (line of sight).
• Power Supply: 1 x MN21 12v Battery.
• Push Buttons: One.
• Frequency: 433 Mhz.
• Size: 90 x 40 x 15mm.
• Colour: White, Grey & Red Button.
• Optional Cable Connection: Yes.

Transmitter Mounting Box:

• Material: Plastic.
• Weatherproof: IP65.
• External Size: 195 (L) x 90 (W) x 45 (D) mm.
• Internal Size: 133 (L) x 83 (W) x 35 (D) mm.

Push Button Specification:

• Size: 85mm (L) x 40mm (W) x 40mm (D)
• Contact Type: NO or NC.
• Sealed Wired Contacts.
• Words: Please Ring.