Combination Locking Bolt Lock

External or Internal Combination Locking Bolt Assembly, ideal for fitting onto a gate, shed or any other small outbuilding.

Key Benefits:

• No keys to carry around.
• Easy & quick to install.
• Combination can be reset. 
• 10,000 combinations.
• Anti-tamper screws supplied.
• Corrosion resistant zinc diecast body.
• Can be installed Horizontal & Vertical.

• Locking Device.
• Locking Keep.
• 6 x Security Screws.

• Lock Size: 90 (L) x 50 (W) x 30 (D) mm.
• Keep Size: 50 (H) x 22 (W) x 22 (D) mm.
• Bolt Size: 10 (Diameter) x 23 (L) mm.
• Combination Numbers: 4
• Resettable Combination: Yes.
• Combination Options: 10,000.

Fitting Instructions:
Set your own combination by following very simple instructions.
Decide on the correct location for the lock, this can be in a vertical or horizontal position making it easy to choose the most practical position.
Hold the slide bolt in the required position and check the slide bolt and the gate/door will function correctly, once positioned correctly, fit the lock onto the gate using the security anti tamper screws supplied (you can use small wood screws as a temporary installation to ensure you have the lock correctly lines up).
Follow the same proceedure and fix the locking keep onto the gate post (or drill a hole into the post to use as an internal keep).