Delux Smart Wireless Alarm & Built in Telephone Dialler System.

One of our Best Selling Alarms Systems, the Delux Wireless Smart Alarm with Built in Telephone Dialler, 2 x Internal Door/Window Contacts, 2 x PIR's & 2 x Remote Controls, 1 x Battery Powered Wireless Siren & strobe, 1 x Dummy Siren, can be used as:

• A complete Alarm System to cover most sized Homes or small Business Premises.
• Or as a good base to build a far more Comprehensive Wireless Alarm System designed for your specific requirements.

This Alarm Control Panel would be connected to one of your telephone line extensions (most customers would simple use a plug in splitter) therefore there are no hidden running costs apart from the cost of a call should the alarm make one. It will contact up to 8 key-holders with your own pre-recorded message in the event of an Alarm activation.

Upon receiving a call you can carry out the following actions:  

• Listen to the pre-recorded message.
• Press # (within 10 seconds of the end of the message).
  • Press 1 to listen into the location of the alarm panel.
  • Press 3 to speak through the Alarm Panel.
  • Press # 1 or # 3 to toggle between the listen in & talk features.
  • Press # # to stop the alarm calling other key-holders.

At the same time the Internal & External Sirens would be triggered to hopefully warn off the Intruder. 

The Internal Magnetic Contact is designed to be used on Doors & Windows, the battery powered magnetic contact would be fitted to either the door/window or frame by using the supplied double sided tape, the magnet would be fitted onto the opposing door, window or frame (using double sided tape & 2 small screws, supplied). They would be fitted so that when the door/window is closed, the two parts would be within 5 mm from each other, when opened a wireless signal is transmitted up to 200 metres (line of sight) back to the Receiver. 

The Wireless PIR, detects people from up to 15 metres distance & 110 degrees, together with a wireless transmission range back to the control panel of 150 metres (line of sight).

Powered by a single PP3 battery (supplied) and supplied with a fully adjustable mounting bracket.

The battery will operate for between 12 - 18 months in most applications (depending on use) and has a built in low battery warning (a slow flashing red LED on the PIR) allowing for suitable battery replacement. The built in power saving technology puts the PIR into hibernation for 3 minutes after each activation. 

There is no limit to how many additional PIR's can be added to our range of Wireless Smart Alarms.

Mounting the PIR Sensor:
The key to successful operation of any PIR sensor is choosing the correct location. A sensor mounted in a unsuitable location has the potential to cause false triggers and reduce performance. The main rules that should be followed are:
1) Mount the PIR into a corner of a room.
2) Avoid heat spots from bright lamps suddenly turning on or off.
3) Do not install immediately above a radiator.
4) Do not install in a glass roof conservatory.

The Battery Powered Wireless Siren & Flashing Strobe is quick & easy to install due to the fact it is battery powered, we would normally recommend fitting it to the front of the property (where it is most visible to neighbours, passing police and potential thieves), for customers with easy access to a power supply we can offer a plug in transformer to power it. It is powered by 4 x D Cell Batteries (supplied), which will last approximately 2 years.

When activated it has twin Sirens supplying 120 Decibel & bright Flashing Strobe Lights, the duration of these can be adjusted between 1 - 10 minutes during installation.

The Siren has other features including:

• Tamper Protection.
• Service Mode (allows customers to silence alarm for any service operations, remote control required).
• Easy to follow installation instructions.

Also supplied is a matching Dummy Siren Box which has built in Flashing LED's powered by 2 x AA batteries (supplied), normally fitted to the rear of the property, some customers will add a third especially when living on a corner plot.

Wireless Remote Control, for arming and disarming your Wireless Smart Alarm, from up to 50 metres away.

 The Remote Control can carry out 5 functions: 

1. Arm: Fully Arms the Alarm System.
2. Alert: Turns on the Alert Mode (this only turns on the zones that have been programmed to work as an alert).
3. Home: This Home Arms the Alarm System, (which excludes the alarm zones been programmed to home, this would typically be PIR's inside the building allowing you to arm the doors, but not the internal PIR's for times when you are inside).
4. OFF: This will disarm the complete Alarm System.
5. Panic: By pressing the Home & Alert Buttons at the same time, it will fully activate the Alarm Systems (even when the alarm is disarmed), this is very popular for keeping inside the bedroom at night.

The impressive Control Panel has all the features you would expect from a far more expensive Alarm System whilst remaining easy to use and program, ideal for DIY Installations, these include:

• Built in 130 Decibel Siren (adjustable duration).
• Back up Battery.
• User Keypad (used for simple programming and daily operation).
• Stylish Back Light (very useful coming into a dark room).
• Adjustable Exit & Entry Durations.
• Two way Communication for the person being called.
• 8 Wireless Channels (no limit to the number of alarm detectors that can be used).
• Can be also used with Remote Controls & Battery Powered Wireless Keypad (up to 99 remote controls can be used).
• Built in Chime Alert (on any of the 8 wireless channels, easily by turned ON & OFF to suit different times of the day).
• Pre-record your own personal 20 second message.
• The Alarm panel can call up to eight key-holders, between 1 & 9 times following an activation.
• Options for operation are Fully Armed, Home Armed, Alert Mode & OFF. 
• Built in Low Battery Warning.

• 1 x Wireless Smart Alarm Control Panel & Built in Telephone Dialler.
• 1 x 3-pin Plug in Transformer (2-pin available upon request) for the Alarm Control Panel.
• 1 x Telephone Cable.
• 3 x PP3 Batteries (alarm control panel & PIR).
• 2 x Magnetic Contacts.
• 2 x Magnets.
• 2 x Set of Mounting Screws.
• 2 x Set of Double Sided Tape.
• 4 x AAA batteries (for the magnetic contacts).
• 2 x PIR's. 
• 2 x PIR Mounting Brackets.
• 2 x Remote Control & Battery.
• 1 x Wireless Siren.
• 4 x D sized Batteries (for the siren).
• 1 x Dummy Siren Box.

Wireless Alarm Receiver & Telephone Dialler:

• 8 Channels (no limit to number of alarm detectors can be used on each channel).
• Can be used with up to 99 Remote Controls & Wireless Keypads.
• Will contact up to 8 key-holders (between 1 & 9 times, chosen during programming).
• Message in self-recorded (up to 20 seconds). 
• Backlight (engages as you press any button).
• Built in 130 Decibel Siren (duration adjustable between 1 - 6 minutes).
• Adjustable Exit Delay (10 - 60 seconds).
• Adjustable Entry Delay (10 - 60 seconds).
• Low Battery Warning (visual battery guage for the back up battery when power is OFF).
• Built in Panic Function (can be triggered using Built in Keypad, Remote Control & Wireless Keypad).
• Duress Function (allows key-holder to turn the alarm partially OFF, telephone dialer remains active).
• Receiving Telephone can toggle between Listen In & Talk function.  
• Size of Panel: 190 (w) x 114 (h) x 35 (d) mm.
• Power Supply: Plug in 3-pin Transformer (2-pin available upon request).