Vibration Sensor for the Wireless Smart Alarm
Wireless Smart Alarm Vibration Sensor, designed to detect Door & Windows being forced open, activates the Alarm before entry has been achieved, for use with our Smart Wireless Alarm Systems.
Recipient :
* Required fields
or Cancel
005-3580
New
Wireless Smart Alarm Vibration Sensor, designed to detect Door & Windows being forced open, activates the Alarm before entry has been achieved, for use with our Smart Wireless Alarm Systems.
This product is no longer in stock
Availability date:
Wireless Smart Alarm Shock Sensor, designed to detect Door & Windows being forced open, activates the Alarm before entry has been achieved, for use with any of our our Smart Wireless Alarm Control Panels.
The transmitter is powered by 2 x AAA batteries (supplied) and is fitted near to the window or door by screws or double sided tape (both supplied). The batteries, which will last between 1 - 2 years in normal operation (depending on use), if a low battery situation arises the built in LED will flash red slowly giving ample indication to change the battery.
The vibration/shock sensor is attached to the transmitter by 250 mm of thin cable (could be extended if needed) and is fixed to the door or window by a double sided tape pad (supplied), it is designed to monitor for sudden vibrations.
The wireless transmission range back to any of the Smart Wireless Alarm Receivers is an impressive 200 metres (line of sight).
Internal Wireless Magnetic Door/Window Contact, designed to help protect all types of opening Door & Windows, for use with our Smart Wireless Alarm Systems.
External Wireless Magnetic Door/Window Contact, designed to help protect all types of opening Gates & External or Damp Door & Windows, for use with our Smart Wireless Alarm Systems.
Internal Wireless Smart Alarm PIR, detects people from up to 15 metres distance & 110 degrees angle, with a wireless transmission range of 150 metres (line of sight) back to the Control Panel.
Wireless Remote Control, for arming and disarming your Wireless Smart Alarm, from up to 50 metres away.
Wireless Water Detector, designed to monitor for Water Leaks & Floods, works in conjunction with all of our Wireless Smart Alarm Systems.
Additional Wireless Security Floor Pressure Mat, designed to be placed underneath a doormat, when anyone stands on the doormat, a wireless signal is transmitted back to a Wireless Smart Alarm Control Panel, the panels can be programmed to chime or go into a full alarm mode.
Dummy Alarm Siren & Flashing LED, exactly matching the fully operational Wireless Smart Alarm Siren, ideal addition to any Alarm Installation, or used as a simply deterrent on any building.
Battery Powered Wireless Siren & Flashing Strobe, ideal addition to all installations, quick & easy to install. Works with all of our Wireless Smart Alarm Control Panels.
Unique Wireless Siren Monitoring Sensor, designed to monitor existing Smoke, Gas & Carbon Monoxide Alarms, ideal for ensuring that the correct & legal Sensors are being used whilst still being able to connect it your your Wireless Smart Alarm System.
Battery powered Wireless Keypad used to Arm & Disarm all of the Wireless Smart Alarm Systems, ideal for applications with multiple users, or where using a remote control is not practical (only three left in stock).
Outdoor Wireless PIR for use with the complete range of Smart Wireless Alarms, supplied with a protective rubber hood which results in a tighter detection pattern helping it avoid false alarms from small animals.