Smart Battery Wireless Siren Alarm & PIR.

For locations with no easy or safe access to a power supply, this Battery Powered Wireless Siren & Flashing Strobe doubles up as the Alarm Control Panel, making it an easy & quick Alarm to install (in any location), operates on 868 Mhz. 

Supplied with an Internal PIR & Remote Control, can be used as:

• A small alarm system (to help protect buildings with no power, workshops, garages, holiday homes etc).
• Or as a base to build a more comprehensive system (adding any of the smart alarm detectors, no limit). 

The Alarm is operated using the Remote Control (supplied) or additional Remote Controls & Wireless Keypads.

The PIR detects people from up to 15 metres distance & 110 degrees, together with a wireless transmission range of 150 metres (line of sight).

Powered by a single PP3 battery (supplied) and supplied with a fully adjustable mounting bracket.

The battery will operate for between 12 - 18 months in most applications (depending on use) and has a built in low battery warning (a slow flashing red LED on the PIR) allowing for suitable battery replacement. The built in power saving technology puts the PIR into hibernation for 3 minutes after each activation. 

There is no limit to how many additional PIR's can be added to our range of Wireless Smart Alarms.

Mounting the PIR Sensor:
The key to successful operation of any PIR sensor is choosing the correct location. A sensor mounted in a unsuitable location has the potential to cause false triggers and reduce performance. The main rules that should be followed are:
1) Mount the PIR into a corner of a room.
2) Avoid heat spots from bright lamps suddenly turning on or off.
3) Do not install immediately above a radiator.
4) Do not install in a glass roof conservatory.

The Wireless Remote Control is used for arming and disarming your Wireless Smart Alarm (from up to 50 metres away), it can carry out 3 functions with this system:

1. Arm: Fully Arms the Alarm System.
2. OFF: This will disarm the complete Alarm System.
3. Panic: By pressing the Home & Alert Buttons at the same time, it will fully activate the Siren (even when it is disarmed).

The Siren/Control Panel is powered by 4 x D Cell Batteries (supplied), which will last approximately 2 years, makes the installation very quick, easy & safe (optional plug in transformer available for locations that have easy and safe access to a power supply socket).

When activated it has twin Sirens supplying 120 Decibel & bright Flashing Strobe Lights, the duration of these can be adjusted between 1 - 10 minutes during installation.

The Siren has other features including:

• Tamper Protection.
• Service Mode (allows customers to silence alarm for any service operations, remote control required).
• Easy to follow installation instructions.

Also available is a matching Dummy Siren Box, normally fitted to the rear of the property !!

• 1 x Siren, Strobe & Built in Control Panel.
• 1 x Siren Backing Plate.
• 4 x D Cell Batteries (for siren).
• 1 x PIR.
• 1 x set of mounting screws.
• 1 x PP3 Battery (for PIR).
• 1 x Remote Control.
• 1 x Manual.

Wireless Siren & Control Panel:

• Frequency: 868 Mhz.
• Operational Method: Remote Control or Wireless Keypad (or both).
• Works with all Wireless Smart Alarm Detectors.
• Limit of Detectors Used: No Limit.
• Limit of Remote Controls & Keypads: 99.
• Tamper Switch: Yes.
• Flashing Strobes: Yes (during activation).
• Siren Output: 120 Decibel.
• Power Supply: 4 x D Cell Batteries (supplied).
• Battery Life: 2 Years (normal operation).
• Mains Power: Optional Plug in Transformers.
• Service Mode: Yes (remote control required).
• Siren Duration: Adjustable in Installation & Service (1 - 10 minutes).

Remote Control:

• 3 modes of Operation 
• Arm: Fully Arms the Alarm System.
• OFF: This will disarm the complete Alarm System.
• Panic: By pressing the Home & Alert Buttons at the same time, it will fully activate the Alarm Systems (even when the alarm is disarmed), this is very popular for keeping inside the bedroom at night.
• Frequency: 868 Mhz.
• Power Supply: 1 x 12v Battery (MN27)
• Size: 58 x 31 x 12 mm.
• Operating Distance: 50 metres (line of sight).
• Max Number of Remote Controls Per Alarm System: 99.

PIR:

• Frequency: 868 Mhz.
• Detection Distance: adjustable from 4 - 6 - 15 metres.
• Detection Angle: 110 Degrees.
• Power Supply: 1 x PP3 Battery.
• Transmission Range: 150 metres (line of sight).
• Mounting Method: Adjustable Wall Bracket (using 2 screws).
• Power Saving: Yes (set to 3 minutes between activations).
• Low Battery Warning: Yes (low flashing red LED when the battery is needing replacement).

Siren Battery Level Test:

• Press Alert Symbol on the Remote Control.
• The Siren will Beep once.
• An LED Light will then illuminate (if it is flashing the batteries are getting low, if it is steady the battery is good.