Smart Wireless Alarm, Built in Telephone Dialler & Internal PIR.

8 Channel Smart Wireless Alarm Control Panel with Built in Telephone Dialler supplied with an Internal PIR, can be used as:

• A basic Alarm & Telephone Dialler System.
• A Wireless Entry Chime Alert & Alarm Dialler (to suit different times of the day).
• Or as a base to build a far more comprehensive Wireless Alarm System to suit your exact requirements.

This Alarm would be connected to one of your telephone line extensions (most customers would simple use a plug in splitter) therefore there are no hidden running costs apart from the cost of a call should the alarm make one. It will contact up to 8 key-holders with your own pre-recorded message in the event of an Alarm activation.

Upon receiving a call you can carry out the following actions:  

• Listen to the pre-recorded message.
• Press # (within 10 seconds of the end of the message).
  • Press 1 to listen into the location of the alarm panel.
  • Press 3 to speak through the Alarm Panel.
  • Press # 1 or # 3 to toggle between the listen in & talk features.
  • Press # # to stop the alarm calling other keyholders.

At the same time the 130 Decibel Siren on the control panel has been triggered to hopefully scare off the Intruder. 

The Wireless PIR, detects people from up to 15 metres distance & 110 degrees, together with a wireless transmission range of 150 metres (line of sight).

Powered by a single PP3 battery (supplied) and supplied with a fully adjustable mounting bracket.

The battery will operate for between 12 - 18 months in most applications (depending on use) and has a built in low battery warning (a slow flashing red LED on the PIR) allowing for suitable battery replacement. The built in power saving technology puts the PIR into hibernation for 3 minutes after each activation. 

There is no limit to how many additional PIR's can be added to our range of Wireless Smart Alarms.

Mounting the PIR Sensor:
The key to successful operation of any PIR sensor is choosing the correct location. A sensor mounted in a unsuitable location has the potential to cause false triggers and reduce performance. The main rules that should be followed are:
1) Mount the PIR into a corner of a room.
2) Avoid heat spots from bright lamps suddenly turning on or off.
3) Do not install immediately above a radiator.
4) Do not install in a glass roof conservatory.

The impressive Control Panel has all the features you would expect from a far more expensive Alarm System whilst remaining easy to use and program, ideal for DIY Installations, these include:

• Built in 130 Decibel Siren (adjustable duration).
• Back up Battery.
• User Keypad (used for simple programming and daily operation).
• Stylish Back Light (very useful coming into a dark room).
• Adjustable Exit & Entry Durations.
• Two way Communication for the person being called.
• 8 Wireless Channels (no limit to the number of alarm detectors that can be used).
• Can be also used with Remote Controls & Battery Powered Wireless Keypad (up to 99 remote controls can be used).
• Built in Chime Alert (on any of the 8 wireless channels, easily by turned ON & OFF to suit different times of the day).
• Pre-record your own personal 20 second message.
• The Alarm panel can call up to eight key-holders, between 1 & 9 times following an activation.
• Options for operation are Fully Armed, Home Armed, Alert Mode & OFF. 
• Built in Low Battery Warning.

• 1 x Wireless Smart Alarm Control Panel & Built in Telephone Dialler.
• 1 x Plug in Alarm Control Panel 3-pin Transformer (2-pin available upon request).
• 1 x Telephone Cable.
• 1 x PP3 Battery (control panel back-up battery).
• 1 x PIR
• 1 x Mounting Bracket.
• 1 x PP3 Battery (PIR).
• 1 x Set of Screws.
• 1 x Manual.

Wireless Alarm Receiver & Telephone Dialler:

• 8 Channels (no limit to number of alarm detectors can be used on each channel).
• Can be used with up to 99 Remote Controls & Wireless Keypads.
• Will contact up to 8 key-holders (between 1 & 9 times, chosen during programming).
• Message in self-recorded (up to 20 seconds). 
• Backlight (engages as you press any button).
• Built in 130 Decibel Siren (duration adjustable between 1 - 6 minutes).
• Adjustable Exit Delay (10 - 60 seconds).
• Adjustable Entry Delay (10 - 60 seconds).
• Low Battery Warning (visual battery guage for the back up battery when power is OFF).
• Built in Panic Function (can be triggered using Built in Keypad, Remote Control & Wireless Keypad).
• Duress Function (allows key-holder to turn the alarm partially OFF, telephone dialer remains active).
• Receiving Telephone can toggle between Listen In & Talk function.  
• Size of Panel: 190 (w) x 114 (h) x 35 (d) mm.
• Power Supply: Plug in 3-pin Transformer (2-pin available upon request).