3 sets of Wireless Perimeter 1B Beams, 900m range + outdoor solar siren/chime (DA600+)

DA600+ | 900M Wireless Perimeter Beams & Outdoor solar siren/chime

This unique Long-Range Wireless DA600+ Perimeter Alarm consists of three sets of Wireless Perimeter Beams and a Wireless Solar Siren. No mains power is required on-site, making it ideal for remote locations.

Solar Siren:

The high-quality Solar-Powered Siren with Bright Flashing LED Strobe Lights communicates directly with the 1B-100 Wireless Beams (supplied) and can be integrated with additional beams or sensors as needed.

The siren also functions as the control panel and can be armed or disarmed using a remote control from up to 100 metres away. The siren offers two operational modes:

• Alarm Mode: When armed, the siren activates a 100-decibel alarm and bright flashing LED strobe lights if any detector is triggered.
• Alert Mode: Designed for visitor notifications, this mode triggers a 6-second siren and flashing strobe lights, ideal for businesses where staff work outside.

It is easy to install using a simple mounting bracket and should ideally be positioned on a south-facing wall.

Beams:

The impressive 1B Solar-Powered Wireless Beams (often referred to as laser beams) come with the following features:

• Battery Powered with Built-in Solar Charging: Ensures easy installation.
• Dual Detection Technology: Reduces false alarms from small animals and moving debris.
• 100-metre Detection Range: Covers a larger area with fewer detectors.
• Impressive 900-metre Wireless Range.
• Robust Build Quality.
• Supplied with Wall & Pole Mounting Brackets.
• Test Lights: Assists with straightforward installation.
• Additional Charging Ports: Provides a top-up charge if needed.
• Optional Test Beep: Can be silenced if preferred.

The Dual Detection Technology ensures accurate detection by requiring both sensors (placed 60mm apart on each beam) to be triggered simultaneously, reducing false alarms from insects, leaves, or debris. Each beam includes dual sensors, meaning the 1B-100 model features one sensor pair, while a 2B-100 model would feature two pairs.

The external beams also include an additional charging port, useful in low-light conditions or for installations in partially shaded areas.

Installation is simple, thanks to the built-in red glow light for easy alignment.

Operating Range:

The wireless operating range between the beams and the siren is 900 metres (line of sight). This can be extended using the signal booster (part number 004-2910). The detection range extends up to 100 metres.

You can connect up to 32 sets of beams or sensors with the Solar Wireless Siren, allowing for a mix of different beam sizes within a single system.

For indoor notifications, you can add one or more Internal Receivers (part number 004-2880) to receive alerts inside your home or office.

Compatible with all DA600+ models.

Siren:

• 1 x Solar Powered Siren & Flashing Strobe Light.
• 1 x Wall Bracket.
• 2 x Remote Controls. 

Detector Beams:

• 3 x Sets of Solar Powered Detecting Beams.
• 3 x Sets of Wall Mounting Brackets. 
• 3 x Sets of Pole Mounting Brackets.
• 3 x Sets of Instructions.  

Siren:

• Size: 280 x 180 x 74 mm.
• Siren Options:
• • Loud 4 second chime.
  • Full Siren & Flashing Strobe (duration 1 minute).
• Siren Level: 90 decibel Chime mode, 110 decibel Siren mode.
• LED Illumination: 70 lm.
• Wireless Working Range to Remote Control: over 100 metres (line of sight).
• Wireless Working Range to Perimeter Beams: 900 metres (line of sight).
• Mounting Method: Rear Plate.
• Built in Battery: 3000mAH 6.4v.
• Battery Type: Lithium.
• Frequency: 433 MHz.
• Working Temperature: -30 - +70.

Beams:

• Beam Size: 340 (H) x 123 (W) x 45 (D) mm.
• Power Supply: Re-chargeable AA Batteries.
• Charging Method: Built in Solar Panels.
• Mounting Methods: Wall or Pole.
• Detection Range: 100 metres.
• Transmission Range: 900 metres (line of sight).
• Frequency: 433 Mhz.
• IP Rating: IP66.
• Distance Between Detection Beams: 60mm.
• Number of Beams: 1 set.
• Charging Port: 9 - 12v DC (500 m/A to 1 amp).

Easy Programming Method:

1. Turn On Beams (switch on rear).
2. Mount the Beams.
3. Line up By Eye, String Line etc.
4. Put the relevant Receiver into Learn Mode.
5. Walk through the Beams, at this time (providing you have them correctly lined up), a low red glow will illuminate briefly.
6. The Signal sent to the Receiver from this set of beams will be learned into the relevant receiver.
7. Take the Receiver out of learn mode.
8. The system is now ready.