Sale! 600 metre Wireless Driveway Alarm System

Medium Range (600 metre) Wireless DA600+ Solar Powered Driveway Alarm Kit

004-3660

New

Medium Range (600 metre) Wireless DA600+ Solar Powered Driveway Alarm PIR System.

More details

£ 182.33

(including vat)
In stock, order now for next day delivery

100% secure payment

Medium Range (600 metre) Wireless DA600+ Driveway Alarm System supplied with:

  • 1 x Medium Range Wireless Solar Powered PIR.
  • 1 x Plug in 4-Channel Receiver.

Ideal to help monitor and protect your Driveway, Garden, Yard & Outbuildings.

The range between the PIR & Indoor Receiver is 600 metre (line of sight) which equates to around 200 - 400 metres in most applications (which is sometimes more than enough for many applications), this distance can be doubled by adding a Signal Repeater (004-2910).

Receiver:

The Indoor 4 - Channel Wireless Receiver is powered by a standard 3-pin Plug in Transformer and has the following features:

  • 4 x Adjustable Dry Relay N/O or N/C Outputs (often used to trigger auto-diallers, timer relays).
  • Adjustable 12v DC Outputs (often used with sirens & flashing lights).
  • ON/OFF Switch.
  • Volume Control.
  • 5 minute Exit Delay Possible: (using remote control or receiver).
  • Will work with up to 128 sets of Detectors.
  • Optional Reminder Bleeps.
  • Exit Delay Option.

Wireless PIR:

The Detection range of the PIR is 15 metre (which can be reduced by choosing one of the other  three sensitivity settings) and the detection width is approximately 15 degrees but with a narrow depth.

By fitting the PIR about 1 - 2 metre from the ground, it is possible to avoid detecting small ground animals (providing you mount the PIR horizontal to the ground).

It is powered by a built in Battery which is charged and maintained by the top mounted Solar Panel, there is also an additional charging port in the back of the PIR for applications where the PIR may need the occasional boost charge (shady areas etc).

The PIR is supplied with an easy to mount wall bracket.

The PIR is a nice and compact making it easy to hide away in the installation.

Remote Controls:

The Remote Controls allow you to pause the Receiver for 5 minutes to allow you to leave the premises without activating the system (designed for use when there are Sirens, Bells & Auto-Diallers attached).

It also allows you to trigger the Receiver using it as a Panic Button (useful again when accessories are connected).

Additional Accessories:

Please Note: Compatible with all DA600+ products !!

A unique Wireless Driveway Alarm System, if you need Advice Please Contact US for Friendly, No Obligation Advice !!

If you need assistance in selecting the right product for your personal needs or support after making a purchase, please do not hesitate to contact us:
Contact us
Our opening times: Monday-Friday 8:00am-5:00pm
  • 1 x Solar Powered 600 metre PIR.
  • 1 x 4-channel Wireless Receiver.
  • 1 x 3-pin Plug in Transformer (2-pin available upon request). 
  • 2 x Remote Controls.

Receiver:

  • Receiver Size: 160 (W) x 105 (H) x 35 (D) mm.
  • Power Supply: 15v DC 1amp (3-pin plug in transformer).
  • ON/OFF Button: Yes.
  • Adjustable Volume Control: Yes.
  • Available Channels: 4.
  • Max sets of Beams per Channel: 32.
  • Maximum sets of Detectors per Receiver: 128.
  • Output Voltage: 12v DC.
  • Output Voltage Duration: 1, 10, 60 second & 5 minutes.
  • Built in Chimes: Yes (one per channel).
  • Reminder Bleep: Yes (if programmed).
  • Exit Delay: Yes 5 minutes (if programmed).
  • Frequency: 434.6 MHz.
  • Standby Current: 20 mA.
  • Alarm Current: 180 mA.
  • Relay Rating: 24v DC or 120v AC (2 amp).
  • Wireless Working Range: 900 - 500 metres (line of sight, depending on which detectors are being used).

Wireless PIR:

  • Power Supply: Built in 3.3v LiFEPO4 Battery (500 mAh).
  • Charging Method: Top Mounted Solar Panel.
  • Wireless Range: 600 metre (line of sight).
  • Detection Range: 15 metres (adjustable).
  • Detection Angle: 15 degrees.
  • Size: 100 (w) x 90 (h) x 140 (d) mm.
  • Frequency: 433 MHz.
  • Working Temperature: -30 - +70 Degrees.
  • Solar Panel Output Current: 100mA (bright days).
  • Sensitivity Settings: 3.
    • Low Setting: Press ON/OFF Button 3 times to Turn ON.
    • Medium Setting: Press ON/OFF Button 4 times to Turn ON.
    • High Setting: Press ON/OFF Button 5 times to Turn ON.

Remote Controls:

  • Allows you to pause the Receiver for 5 minutes.
  • Allows you to trigger the Receiver using it as a Panic Button.