Replacement Wireless Transmitter for the Protect 800 Probe Kit

Replacement Wireless Transmitter for the Protect 800 Vehicle Detecting Probe Kit.

This Transmitter requires the Probe (ref number 004-4405).

Wireless Transmitter:

The Wireless Transmitter is powered by 3 x CR123A batteries and is fully weatherproof, the Vehicle Detecting Probe required has 14 metres of Cable going back to this Transmitter Box.

This allows you to install the Transmitter Box in a suitable (covert) location together with being suitable for Wireless Transmission.

The probe is designed to be buried just under the surface/grass parallel to the driveway, and will only pick up moving steel, so it is perfect for locations with large animals roaming around. It can even be placed next to a locked steel gate, and would only detect the gate if it moves.

It is recommended that the Cable is fitted inside some protective sleeving prevent small ground animals damaging it.

There is sensitivity adjustment on the Transmitter Board allowing you to fine tune your Alarm.

The probe board also has a momentary N/O Output Relay should you want to trigger other devices with it.

Please Contact Us for any Questions or Advice !!

• 1 x Transmitter & Control Box.
• 1 x Manual.
• 3 x CR123 Lithium Batteries.
• 1 x Small Flat Head Screwdriver.

• Transmitter Box Size: 155 x 100 x 65 mm.
• Weatherproof: Yes.
• Colour: Black.
• Power Supply: 3 x CR123 Lithium Batteries.
• Sensitivity Adjustment: Yes.
• Reset Settings: Yes (3 - 5 - 9 seconds).
• ON/OFF Switch: Yes.
• 1 x N/O Momentary Output Relay.
• Transmission Range: 800 metres (line of sight).