Long Range Wireless Latching Siren & Strobe Panic Alarm

Long Range Wireless Latching 118 Decibel Siren & Flashing Strobe Panic Alarm

New

Long Range (800 metre) Wireless Panic Alarm with a Loud Latching 118 Decibel Siren & Blue or Red Flashing Strobe Light for use in Panic & Emergency situations.

More details

£ 498.75

(including vat)
100% secure payment

Long Range (800 metre) Wireless Panic Alarm with a Loud Latching 118 Decibel Siren & Red or Blue Flashing Strobe Light for use in Panic & Emergency situations.

The system is supplied with a Large Red Push Button with a Battery Powered Wireless Transmitter attached (can be supplied with transformer upon request), when pressed it will activate the very loud 6-tone 118 Decibel Siren together with a Blue Flashing Strobe which will remain ON, until switched OFF using a seperate Wireless Transmitter (which would be safely hidden away in a location only known to allocated staff).

If needed the Siren duration could be altered to activate for just 1 seconds to 10 minutes (depending on requirement) whilst keeping the Flashing Strobe ON (popular in some types of lockdown situations).

The operating distance between the Transmitters & Control Panel is 800 metres (line of sight), which equates to around 300 - 500 metres in most applications (depending on the nature & quantity of obstructions).

We can supply multiple Siren & Flashing Strobe Light Control Panels and multiple Panic Buttons to cover larger buildings such as Schools & Factories, we can also incorporate into some of these boxes a Wireless signal Booster to help extend the Wireless range (please contact us for advice).

The control panel is powered by a plug in transformer (which can be used to fit into a spur socket if required), we can also offer a Back Up Power Supply for applications wanting to ensure the system works through a Powercut.

The Control Panel is supplied with handy lugs for easy & quick installation.

The Battery Wireless Transmitter supplied attached to the large Panic Button can be supplied with cable allowing it to be mounted into the best possible location for Wireless Transmission and away from any potential interference from other Wireless devices, this could be anything from 1 to 30 metres away. We can also supply a plug in transformer for customers not wanting to power it by battery. 

This is a very Easy to Install Wireless Panic Alarms which can be used in many applications, and can also be altered in many ways to suit many types of different applications.

If you need assistance in selecting the right product for your personal needs or support after making a purchase, please do not hesitate to contact us:
Contact us
Our opening times: Monday-Friday 8:00am-5:00pm

Wireless Control Box:

  • 1 x WR-2500 Receiver.
  • 1 x Latching Relay.
  • 1 x Box with Mounting Flanges.
  • 1 x 3-pin Plug in Power Supply (2-pin available upon request).
  • 1 x Red or Blue Flashing Strobe Light.
  • 1 x 118 Decibel 6-tone Siren (for indoor or external use).

Panic Button:

  • 1 x Large Red Panic Button.
  • 1 x Battery Wireless Transmitter.

Reset Button:

  • 1 x UT-2500 Wireless Transmitter.

Wireless Control Panel:

  • Box Size: 225 x 190 x 67 mm (not including Siren & Strobe).
  • Box Material: Plastic.
  • Box Mounting Method: Handy Mounting Lugs with Pre-drilled Holes.
  • Wireless Operating Range: 800 metres (line of sight).
  • Siren: 118 Decibel (6-tone).
  • Flashing Strobe: Red or Blue.
  • Duration of Siren & Strobe: Latched ON (until reset).
  • Power Supply: Plug in 3-pin Transformer (can be used with spur socket), 2-pin available upon request.
  • Back Up Battery: No (but available upon request).
  • Transmitters Required: Yes (not supplied).
  • Weatherproof: Yes.

Panic Button:

  • Weather Protection: IP66.
  • Connection: N/O.
  • Base Footprint Size: 83 x 83 mm. 
  • Overall Height: 95 mm.
  • Diameter of Push Button: 95 mm.
  • Mounting Holes: 4x elongated integral.
  • Mounting Flange: Snap-on Chassis.
  • Cable Access: M20 Cable Glands (knock out).
  • Seal: PVC.
  • Contacts: Copper alloy/nickel silver.
  • Operating Temperature: –10°C to +65°C.
  • Termination: Screw & Clamp.

Wireless Transmitters:

  • Size of Push Button & Transmitter: 85 x 50 x 25 mm.
  • Size of Push Button: 20 mm Diameter.
  • Mounting Method of Push Button: Rear Mounting Bracket.
  • Size of Magnet: 50 x 15 x 10 mm.
  • Mounting Method of Magnet: 2 x Screws (included).
  • Power Supply: 1 x CR-2 Lithium Battery (supplied).
  • Battery Life: 12 - 24 months (normal operation).
  • Transmission Range: 800 metres (line of sight).
  • Transmission Frequency: 433 Mhz.
  • Programming Method: Internal Dip Switches (very simple).
  • Available Channels: 4.
  • Maximum number of Push Buttons available per System: Unlimited.
  • Input Relays: N/O or N/C.
  • Weatherproof: Yes.