Wireless KP Budget Panic Alarm

Budget KP Wireless Panic Alarm designed for use in Shops & small Business premises, in the event of a Button being press on the Remote Control the Siren will activate for the chosen duration in the chosen mode and can also be reset using the same Remote Control.

You can choose the following modes on the Siren:

• 2 different Tones with Flashing LED.
• 2 different Volume levels.
• Flashing LED only.
• Duration 3 - 6 - 9 minutes (or until turned off using the remote control).

The Siren is powered using a plug in Transformer supplied. 

How it Works:

When Button D is pressed on the Remote Control the Siren will activate in the chosen mode for the chosen duration or until it is turned OFF using the same Remote Control.

The Siren also has a rear located tamper switch.

Panic Button:

The Remote Control can be used from up to 100 metres away, which equates to around 30 - 50 metres in most buildings.

Installation:

Installation is very simple:

1. Fit the Siren assembly to the wall.
2. Power the Siren assembly up by plugging in a standard 3-pin Transformer (we recommend the socket is placed out of reach or sight).
3. Test by pressing Button D on the Remote Control.
4. Reset by using Button B on the Remote Control.
5. Adjust Siren tones, volume or duration if required.

Please Contact US should you have any questions

• 1 x Siren.
• 1 x 3-pin Plug in Transformer.
• 1 x Wireless Remote Control.

Siren:

• Colour: White.
• Duration: 3- 6 - 9 minutes.
• Volume Control: Yes (silent, low, high).
• Flashing LED: Yes.
• Power Supply: 12v DC (3-pin Transformer).
• Wireless Range: 100 metres (line of sight).
• Backup Battery: Yes.

Remote Control:

• Button D: Trigger Siren.
• Button B: Disarm.
• Wireless Range: 100 metres (line of sight).