Long Range 800 metre Wireless Call Alarm (Protect 800)

Long Range (800 metre) Wireless Call Alarm (protect 800), supplied with a Battery Push Button and Plug in Receiver with Volume Control, a choice of 32 Chimes and optional 12v & Relay Outputs (that could be used to operate Flashing Strobes, Buzzers etc). 

A simple Wireless SOS Alarm, suitable for many work locations or home care !!

Wireless Range:

The Transmission range between the Battery Push Button & Receiver is an impressive 800 metres (line of sight), which equates to around 400 - 600 metres in most applications.

Push Buttons:

The versatile Push Button is supplied with a:

• Wall Bracket.
• Belt Clip.
• Lanyard.
• N/O Input Circuit Board (with plastic adhesive mounting pads).

It is powered by a 3v CR123A Battery (supplied) which would last 12 - 18 months in most applications, the Receivers would notify you in a low battery situation).

Additional Push Buttons (006-3100) can be added to cover different locations, the Receiver would identify which entrance is calling (by a different chime and visual notification on the Receiver).

The Push Button also has a N/O Volt Free Input option allowing customers to connect specific Push Buttons to the system.

Receiver:

The Wireless Receiver is powered by a plug in transformer (supplied) and has:

• Volume Control (from zero to approximately 85 Decibels depending on which chime is chosen).
• Simple ON/OFF Button.
• 32 Chime Options (different sounds & durations).
• 12v DC Output (can be used to trigger Flashing LED's, Siren's, Bells etc).
• 12v DC Output with adjustable Duration (5, 30 & 60 seconds or 10 minutes).
• Option to fit AAA Back up Batteries (for applications prone to power cuts).
• Can be Wall or Desk Mounted.
• Mains Powered using a Plug in Transformer (3-pin UK & 2-pin European supplied).
• LED Notification of Loss of Mains Power.
• Low Battery Notification.
• Up to 16 Push Buttons & Sensors could be used.
• Multiple Receivers can be used (no limit).
• Zone Indicator (visual and by chime).
• Dry Relay Outputs (can be used to trigger Diallers, Flashing LED's, Siren's, Bells etc).
• Push Button Check.

Additional Receivers can be added, there is no limit.

A simple to Fit & Use Wireless Call Alert, which can be adapted to many different applications, if you require Advice, Please Contact Us !!

• 1 x Wireless Receiver (Protect 800).
• 2 x Receiver Brackets (wall or desk mount).
• 1 x 3-pin (UK) & 2-pin (EU) Plug in Power Supply.
• 1 x Push Button Assembly.
• 1 x Wall Mount.
• 1 x Belt Clip.
• 1 x Optional Set of Circuit Board Mounting Pads.
• 1 x Lanyard.
• 1 x 3v Lithium CR123A Battery.

Receiver:

• Wireless Operating Range: 800 metres (line of sight).
• Adjustable Volume: Yes (from low to approximately 85 decibel).
• Melody Options: 32.
• Power Supply: 3-pin UK & 2-pin European Transformer Supplied.
• Battery Back Up: Yes 4 x AAA Batteries (not supplied).
• Loss of Mains Power Notification: Yes (LED).
• Low Battery Notification: Yes.
• Maximum Number of Detectors Can Be Used: 16.
• Multiple Receivers can be used: Yes (no limit).
• Zone Indicator: Yes (visual and by chime).
• Dry Relay Outputs: 4 (N/O & N/C Momentary).
• 12v DC Output with adjustable Duration (5, 30 & 60 seconds or 10 minutes).
• Relay Duration: Momentary.
• Mounting Method: Wall or Desk Mounted.
• PIR Battery Check: Yes.
• Optional Pause Modes: Yes.
• Input Voltage: 12v DC 500 mA.
• Frequency: 869.400 – 869.650.

Push Button:

• Wireless Range: 800 metre (line of sight).
• Power Supply: 1 x 3v Lithium CR123A Battery.
• Battery Life: 12 - 18 months (most applications).
• Size without Brackets: 87 x 37 x 30 mm.
• Size with Wall Bracket: 90 x 44 x 30 mm.
• Size with Belt Clip:  87 x 37 x 35 mm.  
• Colour: White.
• Activation Methods: Push Button.
• IP: Yes (56).
• Mounting Methods: Wall or Desk.