4G UltraDIAL Battery Van Alarm with a Wireless BT PIR & Vibration Door Contact

4G UltraDIAL battery powered Wireless Van Alarm:

• 1 x Unique Wireless Door & Vibration Sensor with optional Siren.
• Keypad (on the door sensor) can be used to Arm & Disarm the Alarm system (ideal if the remote controls are absent).
• 1 x Wireless PIR with 130 Decibel Siren.
• 1 x Covert 4G UltraDIAL.
• 2 x Remote Controls.
• Contacts up the 3 x key-holders by Phone Call & Text (if triggered).
• 130 Decibel Siren.
• 100% Wireless.
• Battery Powered.
• Ideal Van and other Vehicle Alarm.

How it Works:

The 4G UltraDIAL, PIR & Magnetic Vibration Contact are all connected to each other within a unique & secure Wireless Network, and all are Armed & Disarmed at the same time using either Remote Control.

If the PIR or Door Sensor detects an Intruder, it will silently trigger the UltraDIAL Alarm before activating the Siren inside the PIR together with the Siren inside the Door & Vibration Sensor (if this has been selected during the set up).

During this time the 4G UltraDIAL will be secretly and silently contacting key-holders by Telephone & SMS.

If additional PIR's or Sirens are added to the system (no limit), they would all sound at the same time. 

The secret of using this Alarm is to hide (or lock) away the UltraDIAL in a safe location within the Vehicle where an Intruder wouldn't even know it is there, this is very easy due to the fact it is Battery powered, Wireless & Fully Weatherproof.

This simple Alarm is ideal for so use in most types of Vans or other Vehicles.

Communication:

The Alarm communicates via the mobile phone networks (nano sim card required).

It will contact up to three key-holders by Telephone (with your own pre-recorded message) & Text Message when activated (text or calls can be turned off if only one method of communication is preferred).

We do offer two Roaming SIM Cards from a third party supplier (at cost) designed for use in Alarms & Tracker Systems, these are low level contract sim cards (working on a direct debit) operating over all the major UK Networks ensuring your Alarm has the best signal available in all locations. 

These can be selected within the drop down options near the Add to Card Button.

The two options are our 20 Plan (click here) & 50 Plan (click here), please click the links to read all about them.

You can also purchase the product with no sim card and simply use your preferred supplier (many options are available).

Additional Wireless PIR's & Sirens:

The Alarm can be paired to various wireless devices (no limit) which have built in Sirens, these will make the sound whilst the Covert UltraDIAL silently calls the key-holders without an Intruder knowing, the Wireless range between the UltraDIAL & accessories is an impressive 100 metres (line of sight).

These options include:

• Indoor Battery Siren (007-0230).
• Outdoor Solar or Battery Siren & Strobe (007-0221).
• Standard PIR (007-0200).
• Standard PIR with Hood (007-1410).
• Door Contacts (007-0260) & (007-1460).

BT PIR:

The battery powered PIR (007-0200) supplied has a built in 130 Decibel Siren, with a 30 second Exit Delay & 5 second Entry Delay. Its detection range is 8 metres with a horizontal coverage of 120 degrees and vertical of 90 degrees.

BT Wireless Vibration & Magnetic Door Contact:

It has a host of features including:

• Optional Vibration Sensor (with adjustable sensitivity settings).
• Optional Magnetic Contact operation.
• Built in Keypad (can be used to Arm & Disarm).
• Can be Armed & Disarmed by the Remote Controls in the kits.
• Optional built in 130 decibel Siren (can be turned off) operates for 30 seconds.
• Optional Door left Open 'Beep' mode (whilst in disarm mode). 
• Optional Door left Open 'Alarm' mode (whilst in Armed state).
• Easy to Fit Magnet.
• It can also be used as a stand-alone Alarm.

You can choose to use the device with Vibration Only, Magnetic Contact Only or with both Enabled.

When used as a Magnetic Contact on a Door, one part would be fitted onto the Door and the other part onto the Frame (in such a position that when closed both parts are nearly touching).

Keypad:

The device has a small keypad that is used to carry out the choice of commands to suit your application together with being able to Arm & Disarm the complete Alarm system in the event you have forgot to carry the relevant Remote Control.

Arming & Disarming:

The Alarms are Armed & Disarmed by using the 2 x Remote Controls (supplied) from up to 100 metres away, up to 9 Remote Controls can be used with each Alarm. 
If the UltraDIAL Alarm is powered by the external 5v power source, then it is possible to Arm & Disarm the Alarm via SMS (text message).There is a 30 second Exit Delay built into the Alarm for easy use.

Contacting Key-holders:

The Alarm will contact between 1 & 3 key-holders (depending on how you have chosen to program the alarm) by Telephone & SMS (either can be turned off whilst programming the alarm) when activated.

It will normally take take between 30 - 60 seconds to call the first key-holder when powered by battery, and quicker when powered by a usb cable (this can vary depending on the mobile phone networks at the time).  

Recording Message:

You can record a 30 second message into the Alarm, which will be replayed to the key-holders when the Alarm calls them.

Power Supply:

The UltraDIAL Alarm is powered by 3 x Lithium AA Batteries (supplied) which will last around 6 months in most applications, it can also be powered by a 5v USB Cable where a power supply is available. If the power supply is used, the batteries can be kept in the Alarm as a backup although they will not be charged by the device.

The BT PIR (007-0200) is powered by 3 x AA Duracell Batteries. 

Receiving a Call:

When the Alarm calls the key-holders, there is the choice to:

• Listen to your pre-recorded message and do nothing (the alarm will contact the other key-holders).
• Listen to your pre-recorded message and press # on your telephone (this will disarm the UltraDial and prevent it from calling further key-holders).
• Listen to your pre-recorded message and press * on your telephone (this will prevent it from calling further key-holders, but keep the Alarm fully armed (ready for further activations).

Wired Alarm Detectors:

The UltraDIAL has one momentary volt free Input, 1 x N/O or N/C, these can be used with many types of wired devices, examples listed below:

• Door Contact.
• Water & Flood Sensors.
• Pressure Mat.
• Tilt Switch.

Easy Programming:

The UltraDIAL is very easy to program, probably the easiest GSM Alarm to program on the market today by using the small built in keypad, following some very simple instructions.

Weatherproof:

The UltraDIAL is fully weatherproof and rated at IP66, so can be hidden in most places inside a Van or Vehcile.

Low Battery:

The UltraDIAL Alarm will send the primary key-holder a SMS (text message) if the batteries are getting low.

Security Screws:

The lid is fitted with 4 x security screws and a tool is supplied as standard.

This is a very versatile Security Alarm ideal for use in most Vans, Trucks, Campervans etc, designed by Ultra Secure Direct.

If you need advice, please Contact Us !!

• 1 x 4G UltraDIAL GSM Alarm.
• 1 x BT PIR.
• 2 x Remote Controls.
• 3 x Lithium AA Batteries.
• 3 x AA Alkaline Batteries.
• 1 x Manual.
• 1 x Tool.
• 1 x Wireless Vibration & Magnetic Contact.
• 1 x Magnet.
• 1 x Set of Double Sided Tape.
• 2 x Screws.
• 1 x CR2 Lithium Battery.

UltraDIAL:

• Battery Power: 3 x Lithium AA Batteries (supplied).
• Battery Life: 6 months in most applications).
• Main Power: Yes (optional 5v DC plug in transformer).
• Programming Method: Easy Built in Keypad.
• Wireless Transmission Range: 100 metres.
• Size: 160 (L) x 82 (W) x 42 (D) mm.
• Colour: Black.
• Wired Inputs: Yes (1 x Volt Free N/O or N/C).
• Cable Entry: 2 x Glands.
• Wireless Inputs: Yes (Wireless PIR's & Door Contacts).
• Wireless Outputs: Yes (Internal & External Sirens, PIR's).
• Operates on 4G, 3G & 2G Networks.
• SIM Card Required: Yes (standard size).
• Calls Key-holders: Yes (maximum of three, which can be turned off).
• Sends Key-holders SMS: Yes (maximum of three, which can be turned off).
• Built in Siren: No (designed as a covert alarm).
• Mounting Method: 2 x Screw Holes in Flange.
• Weatherproof: Yes (IP66).
• Arming & Disarming Method: Remote Control, Keypad, Receiving A Call.
• Remote Operation on Battery: Yes (# to Disarm, * to Stop & Remain Armed).
• Remote Operation on Mains:  Yes (# to Disarm, * to Stop & Remain Armed, SMS to Arm, SMS to Disarm).
• Power Failure Notification: Yes (when used with a plug in transformer).
• Weekly Status Report: Yes (can be turned off).
• Low Battery Notification: Yes (to primary key-holder).
• Recording Message: Yes (this will be replayed to the key-holders when the alarm calls them).
• Frequencies:
• LTE-TDD B38/B40/B41.
• LTE FDD B1/B3/B5/B7/B8/B20/B28.
• UMTS/HSPA+ B1/B8.
• GSM/GPRS/EDGE 900/1800 MHz.

Vibration Contact Sensor:

• Wireless Range: 100 metres (line of sight).
• Internal Siren: Yes 130 Decibel (optional, can be turned ON or OFF).
• Vibration Sensor: Yes (optional). 
• Magnetic Contact: Yes (optional).
• Vibration Sensitivity Adjustment: Yes (low, medium & high).
• Duration of Siren: 30 seconds. 
• Keypad Code Change: Yes (cannot start with 3).
• Keypad To Arm: Yes (press 3). 
• Keypad To Disarm: Yes (code + 3).
• Exit Delay: 20 seconds.
• Entry Delay: 5 seconds.
• Change Code Option: Yes.
• Size of Contact: 60 (H) x 40 (W) x 15 (D) mm.
• Size of Magnet: 45 (H) x 13 (W) x 13 D) mm.
• Power Supply: Battery (1 x 3v Lithium CR2 Battery).  
• Colour: White.
• Open Door Beep: Yes Optional (when disarmed).
• Open Door Siren: Yes Optional (when armed).
• Test Mode: Yes (beep on open & close with 30 second reset.
• Stand-alone Operation: Yes.
• Frequency to Wireless Sirens 868 Mhz.

BT PIR:

• Alarm Detection Type: PIR (passive infrared detector).
• Arming & Disarming Method: Remote Control.
• Transmission Distance: 100 metres (line of sight).
• Built in Siren: Yes (130 decibels).
• Exit Delay: Yes (30 seconds).
• Entry Delay: Yes (5 seconds).
• Siren Duration: 60 seconds (remains fully armed, until disarmed by remote control).
• Detection Range: 8 metres.
• Detection Horizontal Coverage: 120 Degrees.
• Detection Vertical Detection: 90 Degrees.
• PIR Power Supply: 3 x AA Batteries (supplied).
• Remote Control Power Supply: 1 x 3v Lithium Coin Battery.
• Size of PIR: 68 (W) x 108 (H) x 36 (D) mm.
• Size of Remote Control: 75 (H) x 45 (W) x 12 (D) mm.
• PIR Battery Life: 12 - 18 months (normal use).
• Warranty: 1 Year.