Unique DA600+ Wireless Alert with Vertical PIR & Plug in Receiver

DA600+ Wireless Alert:

• 1 x Unique Vertical or Horizontal Indoor or Outdoor Battery PIR (designed to be mounted on a wall looking down or across).
• Weatherproof PIR.
• 1 x Simple 3-pin Plug in Chime Receiver (35 chime options & volume control).
• Impressive 600 metre Wireless Range.
• Protect Vulnerable Doors or Windows at Home (from outside).
• Monitor Retail Doors, Entrances, Stock Rooms, Offices.
• Very Quick & Easy to Install.

This Wireless Alert can be used in many different applications, examples would be:

• Indoor Alert in a Retail Space (detect customers walking through a door or entrance).
• Indoor Alert (protect stock room doors or an office).
• Outdoor Detection (protect vulnerable Doors or Windows).
• Outdoor Detection (looking down on a vehicle in a driveway).

Wireless Range:

The Wireless operating range between the PIR & Receiver is 600 metres (line of sight), which equates to around 200 - 400 metres in most applications (more than enough for most applications) but can be more than doubled by adding a Signal Repeater if required.

Vertical & Horizontal PIR:

This unique DA600+ Vertical or Horizontal PIR can be used both Indoors and Outdoors as it is Fully Weatherproof.

Detection:

The PIR has a wide but narrow detection pattern which allows it to be used above (or to the side) of entrances, windows and doors whilst avoiding false alarms from movement nearby.

It is supplied with mounting brackets designed to make it easy to point the PIR across a Door or Window or straight down towards the Floor protecting Doors & Windows.

Sensitivity:

There are two sensitivity settings (easily changed by moving a dip-switch located in the battery compartment) on the PIR which allows the PIR to be set up to avoid False Alarms from ground animals and other passing traffic, these are:

• Low: 3 metre Detection.
• High: 5 metre Detection.

Battery Powered:

This PIR is powered by 3 x AA Batteries (supplied) allowing for use both Indoors or Outdoors (it is fully weatherproof).

Receiver:

The simple Wireless Chime Receiver simply plugs into a 3-pin wall socket and will chime whenever a PIR detects movement.

It has volume control (4 levels) and 35 different chimes to choose from, allowing you to have a different tune for different PIR's.

The Receiver can be used with up to 32 PIR's, you can also add additional Receivers (no limit) if you want an alert in multiple rooms.

Expansion:

This Driveway Alarm can be used with a multitude of different Alarm Sensors & Receivers including:

• Solar Vertical & Horizontal PIR's.
• Battery Vertical & Horizontal PIR's.
• Standard Battery PIR's.
• Solar PIR's.
• Solar Perimeter Beams.
• Door Contacts.
• Gate Contacts.
• Push Buttons.
• Solar Sirens.
• Additional Receivers.
• T Receivers.
• Receiver with 4 Outputs.
• Signal Repeater.

This is a very simple but effective Wireless Alert ideal which can be expanded in many different ways to match different applications.

Please Contact Us should need Advice.

• 1 x DA600+ Wireless 3-pin Receiver.
• 1 x DA600+ Wireless Vertical & Horizontal PIR. 
• 1 x Set of Batteries.

Receiver:

• Power Supply: 3-pin Socket.
• Volume Control: Yes (4 levels).
• Chimes: 35.
• Wireless Range: 600 metres (line of sight).
• Can work with additional PIR's: Yes (maximum 32).
• Colour: White.
• Size: 85 (H) x 80 (W) x 33 (D) mm.

PIR:

• Wireless Range: 600 metres (line of sight).
• Mounting Angle: Vertical or Horizontal.
• Detection Range:
• Low: 3 metres.
• High: 5 metres.
• Detection Angle: 100 Degrees Vertical, 5 Degrees Horizontal.
• Frequency: 433 MHz.
• Battery: 3 x AA Batteries (supplied).
• Operating Current: 1 m/A (standby) 60 m/A (activating).
• Colour: Black.
• Operating Temperature: -30 Degrees C to +70 Degrees C (-22 F to +158 F).
• Dimensions: 90 (W) x 130 (H) x 80 (D) mm.