Protect 800 Wireless Vehicle Detecting Probe & PIR Driveway Alarm System
Protect 800 Wireless Vehicle & Motion Detecting Driveway Alarm Kit:
Recipient :
* Required fields
or Cancel
004-4430
New
Protect 800 Wireless Vehicle & Motion Detecting Driveway Alarm Kit:
This product is no longer in stock
Availability date:
Protect 800 Wireless Vehicle & Motion Detecting Driveway Alarm Kit:
It may be suitable to use both detectors in the same area, or there may be two locations that require a different solution (one may be prone to animals for example).
How it Works:
If the hidden Probe Detects moving Steel (vehicle, push bike or moving steel gate), a Wireless Signal will be transmitted up to 800 metres away (line of sight which equates to around 400 - 600 metres in most applications) to the Receiver (or receivers).
The Battery powered PIR is supplied with simple to fit (and remove) lens caps allowing you to adjust it to suit your applications, and to be able to avoid detecting small ground animals if that is required. When the PIR detects movement a different signal will be sent to the Receiver (or receivers).
The Receiver will Chime together with indicating which sensor has been triggering by having a different chime and illuminating a different LED. It will also operate any other devices that have been connected to it.
This is a very impressive Wireless Driveway Alarm !!
Wireless Transmitter & Probe:
The Wireless Transmitter is powered by 3 x CR123A batteries and is fully weatherproof, the Vehicle Detecting Probe is supplied with 15 metres of Cable going back to the Transmitter Box, this allows you to install the Transmitter Box in a covert location and a location suitable for Wireless Transmission.
The probe is designed to be buried just under the surface/grass parallel to the driveway, and will only pick up moving steel, so it is perfect for locations with large animals roaming around. It can even be placed next to a locked steel gate, and would only detect the gate if it moves.
It is recommended that the Cable is fitted inside some protective sleeving prevent small ground animals damaging it.
There is sensitivity adjustment on the Transmitter Board allowing you to fine tune your Alarm.
PIR:
Lens Caps:
The PIR is supplied with 3 Lens Cap Settings which together with internal adjustments allow you to set the PIR to suit your application, these include:
Installation Tip:
We recommend the PIR is fitted looking away from a rising Sun rather than towards it, if this is not possible then care should be taken when choosing the location and direction of the PIR, this basic principle is the same for most outdoor PIR's.
The PIR's can also easily be hidden inside plastic and wooden structures with some simple imaginative creation to help hide them (or we can supply a steel cage), the strong 800 metre wireless transmission helps this be possible.
Operational Options:
This Wireless Driveway Alert has the unique feature of being able to use the PIR in two ways:
This allows you to perhaps have some PIR's working throughout the day on a subtle chime from the Receiver, and other PIR's that only work when it is dark, which would trigger a louder Siren on the Receiver (ideal for protecting buildings like workshops etc).
Operational Options:
Our best selling Wireless Driveway Alarm can be used with up to 16 x Detectors ranging from:
Receivers:
You can add additional Receivers (004-4110) to the system (there is no limit) together with being able to add external Receivers which can operate 12v Flood Lights, Sirens, Bells etc.
The Receiver has a 12v Output which can be used to operate Wireless & Wired Sirens, Flashing LED's & Buzzers for customers wanting a Loud Internal or External Warning.
The Receiver also has a N/O & N/C Momentary Output which can be used to Trigger GSM Auto-Diallers.
Please Contact Us for any Advice !!
Compact Wireless Siren & Strobe, suitable for use with many types of Security Systems. Sorry, No Longer Available !!
Hard Wired 118 6-tone Decibel Siren.
Recordable Speech Warning Alarm, replay a warning or safety message to visitors, adjustable volume control up to 100 Decibels.
Two Way Switch, often used with Sirens & Flashing Lights
Loud External or Internal 12v DC Bell for use with many of our Long Range Wireless Bell & Wireless Driveway & Perimeter Alarms.
Blue Flashing Strobe Light, for use with many types of Security & Safety Systems.
Red Flashing Strobe Light, for use with many types of Security & Safety Systems.
Mini Internal Wireless Siren & Strobe, supplied with a Transmitter & Power Supply.
Additional 4-channel Wireless Receiver for the Long Range Protect 800 Wireless Driveway Alert.
Additional PIR with New multiple Lens Caps for the Protect 800 Wireless Driveway Alert.
Wireless Solar Siren & Universal Wireless Transmitter allowing you to connect this Solar Siren to many types of Alarm Panels.
An Outdoor Wireless Bell Receiver for use with our popular Protect 800 Driveway Alert, for customers wanting to be notified of visitors when they are outside, it needs plugging into a suitable 3-pin wall socket.
An Outdoor Wireless Adjustable Siren & Flashing LED Receiver for use with our popular Protect 800 Driveway Alert, for customers wanting to be notified of visitors when they are outside, it needs plugging into a suitable 3-pin wall socket.
Additional PIR located inside a wooden Bird box for the Protect 800 Wireless Driveway Alert.
A protective Wooden Bird-box designed for housing the Protect 800 Wireless PIR.
Long Range Battery Powered Wireless (800 metre) Multi Use Transmitter for the Protect 800, supplied with a Wall Bracket, Belt Clip, Lanyard or can be used as a Circuit Board only to cover many applications (requires a suitable receiver).
An Outdoor Wireless Bell Receiver for use with our popular Protect 800 Driveway Alerts & Long Range Bells, for customers wanting to be notified of visitors with a loud Bell, it is powered by a simple 3-pin wall socket.
Long Range Battery Powered Wireless (800 metre) Transmitter Board with a N/O Input mounted inside a Weatherproof Box, for use with the Protect 800 series.
Weatherproof Panic Button assembly with a 'SOS' logo supplied with a built in 800 metre 'V Range' Wireless Transmitter for use with our Wireless Protect 800 Alarms & Alerts.
An Outdoor Wireless Adjustable Siren & Flashing LED Receiver for use with our popular Protect 800 Driveway Alert, for customers wanting to be notified of visitors when they are outside, it needs plugging into a suitable 3-pin wall socket.
An Outdoor or Indoor Wireless Siren & Flashing LED Receiver for use with our Protect 800 Driveway Alert & Long Range Bells, for customers wanting to be notified to the arrival of visitors using a Loud Siren, it is powered by plugging into a suitable 3-pin wall socket.
Long Range Battery Powered Wireless (800 metre) Gate or Roller Shutter Door Contact for use with the Protect 800 Alarms.
Protect 800 additional Wireless Vehicle Detecting Probe & Transmitter: Only Detects moving Steel (avoid False Alarms from Wildlife). Battery Powered Wireless Transmitter (easy and quick Installation). 800 metre Operation. Covert Probe (can be fully hidden during Installation). Operates with both the Indoor & Outdoor Protect 800 Receivers.
Long Range (800 metre) Remote Control & SOS Button for the Protect 800 Outdoor Receiver, allows you to Arm & Disarm either channel on the Receiver together with having an SOS option.
A unique 2 x channel Outdoor Wireless Receiver designed to operate 12v Floodlights, Sirens & Buzzers with the long range Protect 800 Driveway Alarm Sensors.
Protect-800 Outdoor Wireless Receiver supplied with a 12v Security Flood Light which can be added onto any of the Protect-800 Alarms & Alerts.
Protect-800 Outdoor Wireless Receiver supplied with a 85 Decibel 12v Weatherproof Bell which can be added onto any of the Protect-800 Alarms & Alerts.
Protect-800 Outdoor Wireless Receiver supplied with an adjustable 12v Weatherproof Siren which can be added onto any of the Protect-800 Alarms & Alerts.
Protect-800 Outdoor Wireless Receiver supplied with a 12v Blue Flashing Strobe LED which can be added onto any of the Protect-800 Alarms & Alerts.
Protect-800 Outdoor Wireless Receiver supplied with a Loud 6-tone 118 Decibel 12v Weatherproof Siren which can be added onto any of the Protect-800 Alarms & Alerts.
Protect-800 Outdoor Wireless Receiver supplied with a 12v Siren & Flashing Strobe LED which can be added onto any of the Protect-800 Alarms & Alerts.
Photo Cells & Transmitter Kit for the Protect Wireless 800 Alerts & Alarms ideal for applications across Warehouse & Gate Entrances (if power is available on one side). It works in conjunction with all the Protect-800 Receivers.
A protective Steel Cage A designed to help protect various Security devices from Damage or Theft.
Additional PIR with Protective Wire Cage & multiple Lens Caps for the Protect 800 Wireless Driveway Alarm. The Cage is designed to help avoid Vandalism & Theft.
A protective Steel Cage D designed to help protect various Security devices from Damage or Theft.
Wireless Transmitter & Probe:
PIR:
Receiver: