No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Large Green Push Button with a DA600+ Wireless Transmitter for use with the 1000 metre Wireless Bell Systems (006-2000) or the Wireless Receiver (004-2880).
The Wireless Transmitter 004-2940 is battery powered and has a transmitting distance of 100 metres (which can be increased to over 1000 metres by using the Signal Repeater 004-2910).
The Push Button is fully weatherproof (IP66).
-
![Additional Wireless Bell Kit]( "Additional Wireless Bell Kit")
Additional DA600+ Bell Kit for the 1000 metre Wireless Warehouse & Factory Bell System
Reference: 006-2010Additional DA600+ Wireless Bell Kit for the 1000 metre operating range Wireless Bell System (006-2000) for applications that require a second or third Bell. These can be mounted both inside & outside.
£ 209.95 -
![1B-60 Solar Powered Wireless Perimeter Beams]( "1B-60 Solar Powered Wireless Perimeter Beams")
1B-60 Solar Powered Wireless Perimeter Beams (DA600+)
Reference: 004-3880Additional Solar Powered Wireless 1B-60 Perimeter Detector Beams (DA600+) with Dual Detection Technology, 60 metre Detection & 400 metre Transmission.
£ 131.95 -
![Additional Battery DA-600 Wireless PIR]( "Additional Battery DA-600 Wireless PIR")
Additional Battery DA600+ Wireless PIR
Reference: 004-3890Additional Battery Powered DA600+ Wireless PIR, ideal for locations where Solar Charging may be impractical, can be used with all of our DA600+ Driveway & Perimeter Alarms.
£ 30.45
- 1 x Large Green Push Button.
- 1 x Wireless Transmitter 004-2940.
Push Button:
- Weather Protection: IP66.
- Base Footprint Size: 83 x 83 mm.
- Overall Height: 95 mm.
- Diameter of Push Button: 95 mm.
- Mounting Holes: 4x elongated integral.
- Seal: PVC.
- Operating Temperature: –10°C to +65°C.
- Termination: Screw & Clamp.
Wireless Transmitter:
- Wireless Range: 100 metres (line of sight).
- Power Supply: 1 x Lithium CR2450 3v Coin Cell.
- Size: 60mm (D) x 25 (H) mm.
- Installation Method: Double Sided Tape.
