Wireless Lockdown Alarm with Adjustable Buzzers, Latching Flashing LED's

Wireless Lockdown Alarm with large Red Wireless Panic Button, Adjustable Buzzers, Latching Red or Blue Flashing LED's & 1 x Wireless Reset Button.

This Lockdown Alarm Kit is supplied with the following (although we can adjust the alarm to suit many types of applications):

• 1 x Plug in Lockdown Alarm Panel with an adjustable Buzzer & Red or Blue Flashing Strobe.
• 2 x Strobe & Buzzer extensions with 20 metres of Cable.
• 1 x Large Red Panic Button with a Long Range Wireless Transmitter attached.
• 1 x Wireless Reset Button.

How it Works:

When the large Red Panic Button is activated, a Wireless Signal will be transmitted to the Wireless Receiver, this will activate the built in Buzzers for 1 second to 10 minutes (adjustable) with the Red or Blue Flashing Strobes latching ON, these Flashing Strobe Lights would be switched OFF using a Wireless Reset Button (which would be hidden away), the buzzers would also sound again (for the selected time duration) as the Flashing LED's are turned OFF.

The two additional Flashing Strobe & Buzzer Kits are connected to the Wireless Control Panel by 20 metres of 4-core cable, this can be lengthened upon request.
This allows three locations to be covered using just one Wireless Receiver. If further rooms need to be included, then we can supply additional Wireless Control Panels and Flashing Strobe Kits, we do not recommend using more than two Flashing Strobe Kits per Control Panel.

Variations:

This is just one example of a Wireless Lockdown Alarm, variations could be endless, a few examples listed below:

• Just one Main Control Panel no additional Flashing LED & Buzzer required.
• Additional Wireless Control Panels (for multiple room applications).
• Additional Wireless Control Panels with built in Signal Repeaters (for very large buildings).
• Different type of Siren built onto the Control Box.
• Additional Flashing Strobe Lights & Buzzers (recommend no more than two or three working with a single control panel).
• Additional Wireless Panic Buttons.
• Additional Reset Buttons.
• Different styles, shapes and sizes of Panic Buttons.

Wireless Transmission:

The operating distance between the Transmitters & Control Panel is 800 metres (line of sight), which equates to around 300 - 500 metres in most applications (depending on the nature & quantity of obstructions). If more range is required, we can supply an additional Control Panel with a signal repeater built into it.

Power Supplies:

The control panel is powered by a plug in transformer (which can be used to fit into a spur socket if required), we can also offer a Back Up Power Supply for applications wanting to ensure the system works through a Powercut.

The Wireless Transmitter is powered by Battery, although transfomers can be added upon request.

The Control Panel & additional Buzzer & Flashing Strobe Kits are supplied with handy lugs for easy & quick installation.

Please Contact Us for any Advice !!

• 1 x Wireless Control Panel with Buzzer & Red or Blue Flashing Strobe Lights.
• 1 x 3-pin Plug in Transformer (2-pin available upon request).
• 2 x Wired Satelite Buzzer & Red or Blue Flashing Strobe Lights.
• 1 x Large Red Panic Button with Connected Wireless Transmitter.
• 1 x Wireless Reset Button.

Wireless Control Panel:

• Size: 225 x 190 x 67 mm (not including Strobe).
• Box Material: Plastic.
• Box Mounting Method: Handy Mounting Lugs with Pre-drilled Holes.
• Wireless Operating Range: 800 metres (line of sight).
• Siren: 3-tone Approximately 100 Decibel.
• Flashing Strobe: Blue or Red.
• Duration of Buzzer: 1 second to 10 minutes.
• Duration of Flashing Strobe: Latched ON (until reset).
• Power Supply: Plug in 3-pin Transformer (can be used with spur socket), 2-pin available upon request.
• Back Up Battery: No (but available upon request).
• Weatherproof: Yes.

Wired Buzzer & Flashing Strobe Kits:

Enclosure:

• Material: Plastic.
• Weatherproof: IP65.
• External Size: 113 (W) x 153 (H) x 53 (D) mm.
• Internal Size: 82 (W) x 90 (H) x 45 (D) mm.

Strobe:

• Colour: Red or Blue.
• Voltage: 9 - 12v DC.
• Diameter: 75 mm.
• Depth: 55 mm.

Buzzer:

• Operating Voltage: 6 - 15 v DC.
• Rated Current at 12v: 95mA.
• Sound Output: 100 Decibel @ 1metre (with 12v supply).
• Size: 40 mm Diameter x 22 mm Depth.
• Mounting Lugs: 55mm Tip to 33mm Holes.
• Operating Temperature: -20 - + 70 Degrees.
• Colour: Cream.
• Power Cables: Red & Black.
• Tone Cables: Orange, Green, Yellow.

Cable:

• 4-core.
• Length: 20 metres (can be altered upon request).

Panic Button:

Panic Button:

• Weather Protection: IP66.
• Connection: N/O.
• Base Footprint Size: 83 x 83 mm. 
• Overall Height: 95 mm.
• Diameter of Push Button: 95 mm.
• Mounting Holes: 4x elongated integral.
• Mounting Flange: Snap-on Chassis.
• Cable Access: M20 Cable Glands (knock out).
• Seal: PVC.
• Contacts: Copper alloy/nickel silver.
• Operating Temperature: –10°C to +65°C.
• Termination: Screw & Clamp.

Wireless Transmitter:

• Size of Push Button & Transmitter: 85 x 50 x 25 mm.
• Size of Push Button: 20 mm Diameter.
• Mounting Method of Push Button: Rear Mounting Bracket.
• Size of Magnet: 50 x 15 x 10 mm.
• Mounting Method of Magnet: 2 x Screws (included).
• Power Supply: 1 x CR-2 Lithium Battery (supplied).
• Battery Life: 12 - 24 months (normal operation).
• Transmission Range: 800 metres (line of sight).
• Transmission Frequency: 433 Mhz.
• Programming Method: Internal Dip Switches (very simple).
• Available Channels: 4.
• Maximum number of Push Buttons available per System: Unlimited.
• Input Relays: N/O or N/C.
• Weatherproof: Yes.

Reset Button:

• Size of Push Button & Transmitter: 85 x 50 x 25 mm.
• Size of Push Button: 20 mm Diameter.
• Power Supply: 1 x CR-2 Lithium Battery (supplied).
• Battery Life: 12 - 24 months (normal operation).
• Transmission Range: 800 metres (line of sight).
• Transmission Frequency: 433 Mhz.
• Programming Method: Internal Dip Switches (very simple).
• Maximum number of Push Buttons available per System: Unlimited.
• Weatherproof: Yes.