KP Wireless Curtain PIR

Wireless Curtain PIR

005-1450-00

New

Wireless Curtain PIR, creates a very narrow detection beam (ideal for locating behind patio doors, bay windows etc). For use with all of our KP Wireless Alarm Systems & Alert Watch.

More details

£ 32.50

(including vat)
100% secure payment

These Wireless Curtain PIR's, create a very narrow detection beam (ideal for locating behind patio doors, bay windows, etc) without expanding into the room.

They are also ideal for locating above or to the side of a Door for customers wanting to monitor a particular Door or Room.

Designed to work in conjunction with all of our KP Wireless Alarm Systems and the Alert Watch, they have a 9 - 12 metre range (can be reduced) & 15 degrees detection pattern and a wireless range back to the receiver of 100 metres (line of sight).

When mounted vertically, they will creates a very narrow beam (ideal for protecting bay windows, balcony applications & french doors), when mounted in a horizontal position, they create a wide detection pattern avoiding the ground and ceiling (ideal for buildings prone to small animals).

Being battery powered, they can be very easily installed into any location.


  • 1 x KP Wireless Curtain PIR.
  • 1 x Mounting Bracket.
  • 1 x Set of AA Batteries.
  • Size of PIR (without bracket): 100 (H) x 55 (W) x 47 (D) mm.
  • Size of PIR (with bracket): 120 (H) x 65 (W) x 90 (D) mm deep with bracket.
  • 3 setting Detection Range: 2-4, 4-9, 9-12 metres (distance).
  • Detection Angle: 15 Degrees Horizontal.
  • Power Supply: 2 x AA Batteries.
  • Battery Life: Approximately 12 months (normal use).
  • Reset Time: 5 seconds (test or entry alert) or 5 minutes (burglar alarm).
  • Wireless Transmission: 100 metres (line of sight).
  • Alarm Indicator: Red LED (on or off).
  • Low Power Indicator: Yellow LED.
  • Operating Temperature: - 10 - +50 Degrees.
  • Frequency: 315 or 433 Mhz.


Mounting the PIR Sensor:
The key to successful operation of any PIR sensor is choosing the correct location. A sensor mounted in a unsuitable location has the potential to cause false triggers and reduce performance. The main rules that should be followed are:

  1. Mount the PIR behind a Window or Door (looking directly along the window or door frame).
  2. Avoid heat spots from bright lamps suddenly turning on or off.
  3. Do not install immediately above a radiator.
  4. Do not install in a glass roof conservatory.