1000 metre Wireless Warehouse & Factory DA600+ Bell System

1000 metre operating range Wireless DA600+ Bell System designed for use inside many types of buildings including:

• Warehouses.
• Schools.
• Factories.
• Farms & Rural Businesses.
• Large Homes.
• External Home Offices.
• Workshops.

Compatible with all DA600+ products !!

The system has also been designed for very easy & quick installation, the installation process is listed below:

• Mount the large fully weatherproof Push Button (no cables).
• Fit the weatherproof 'Please Ring For Attention' sign (4 x screws).
• Fit the Wireless Repeater next to a 13-amp wall socket, and plug in the transformer supplied (this needs to be within approximately 30 - 40 metres from the push button).
• Mount the weatherproof Bell Kit (4 x screws) within 1000 metres (line of sight) of the Repeater (additional bell kits can be purchased, reference 006-2010).

Bell Kit:

The loud (85 decibel) weatherproof Bell is fitted onto a mounting box for easy installation, inside this box is a Wireless Receiver which is powered by a standard 3-pin Plug in Transformer (2-pin available upon request). The Bell has been programmed to operate for 10 seconds each time the large Green Push Button is pressed, this time can be increased to 60 seconds or 5 minutes if required.

The operating distance between the Bell Kit & signal Wireless Repeater is well over 1000 metres (line of sight), exact range will be dependant on the quantity & nature of the obstructions between the two, but in nearly all aplications we would expect at least 500 - 800 metres.

Additional Bell Kits (006-2010) & Push Button Kits (006-2030) can be added although it may be neccessary to add a further Signal Repeater (004-2910) if a second Push Button is out of range of the original Repeater.

Push Button:

The large Green Push Button has a battery powered Wireless Transmitter fitted inside and is fully weatherproof (IP66), it can simply be fitted into the most convenient location not having to worry about a power supply. There is also a weatherproof 'Please Ring For Attention' sign which can be fitted next to the Push Button.

We would expect Installation to be easily within an hour, with no specialist trades required, please contact us if you have any questions.

• 1 x Bell Kit (includes Bell, Wireless Receiver, Mounting Box & 3-pin Transformer).
• 1 x Wireless Signal Repeater.
• 1 x Weatherproof Push Button & Wireless Transmitter.

General:

• Operating range: 1000 metres (line of sight).
• Bell duration: 10 seconds (can be changed to 1 or 60 seconds or 10 minutes).
• Power Required: 2 x 13-amp 3-pin Wall Sockets.

Push Button:

• Weather Protection: IP66.
• Base Footprint Size: 83 x 83 mm. 
• Overall Height: 95 mm.
• Diameter of Push Button: 95 mm.
• Mounting Holes: 4x elongated integral.
• Seal: PVC.
• Operating Temperature: –10°C to +65°C.
• Termination: Screw & Clamp.

Wireless Transmitter:

• Wireless Range: 100 metres (line of sight).
• Power Supply: 1 x Lithium CR2450 3v Coin Cell.
• Size: 60mm (D) x 25 (H) mm.
• Installation Method: Double Sided Tape.

Bell:

• Power Supply: 12v DC.
• External: Yes.
• Size: 150 mm Diameter x 60 mm Deep.
• Mounting Bracket: 4 x Holes.
• Volume: Approx 85 Db.

Wireless Repeater:

• Wireless Range: 1000 metres (line of sight).
• Power Supply: Plug in 3-pin Transformer (2-pin available).
• Frequency: 433 Mhz.
• Size: 160 (w) x 160 (h) including Aerial x 55 (d) mm.

Sign:

• Words: Please Ring For Attention.
• Material: Plastic.
• Pre-drilled Holes: Yes (4).
• Weatherproof: Yes.